TEMPERATURE
SENSOR
Sensing
Element: RTD, Type Pt100 Class B
Temperature Ranges: Customer re-scalable between -200°C to 600°C (-328ºF to +1112ºF) or -50°C to 200°C
(-58ºF to +392ºF) depending on model. No
re-calibration required.
Switching
Ranges: Customer programmable between -200ºC to + 600ºC (-328ºF to +1112ºF) depending on model.
Hysteresis:
Customer programmable, 1% of range standard factory setting.
Accuracy:
±(0.25ºC + 0.40% of reading) max. with default calibration.±(0.10ºC + 0.20% of reading) max. with one-point factory or customer
calibration.
Open
circuit detection: Upscale (2.5mA) or Downscale (22mA) current output. Error message on LED display.
Warm-up:
30 seconds.
Response
Time: 0.5 sec to 30 sec (software selectable
)
DISPLAY
Display:
4 DIGIT LED, decimal point selectable by software.
Display
resolution: ±0.02% F.S. ±1 DIGIT
RFI
effect: 1 % or less typical
Temperature
Effect: <0.01 % FS/oC
Ambient
Temp. Range: -40°C to 80°C(-40°F to 176°F)
Storage
Temp. Range: -50°C to 85°C(-58°F to 185°F)
Max.
Pressure: 500 PSIG (on probe)
Housing
Material: Stainless Steel 316
Probe
Material: Stainless Steel 316 standard
Window
Material: Lexan
Cable
Materials: PVC, Teflon or Silicone
Environmental
Protection: NEMA 4X/IP65
ELECTRICAL
Power
Supply: 9 to 36 Vdc, polarity protected
Supply
Effect: 0.005%/V
Power
Consumption: 15mA @ 24Vdc + output current - 950mW max. 50 mA @ 24Vdc for Relay Output - 1200mW max.
Current
Output: 4 to 20mA (3 wires configuration) linear to temperature. Max
load on current output: (Vsupply-9V)/20mA
Switching Output: Relay SPDT 0.5A @ 240 Vac
Switching
Logic: NC or NO Software selectable.
Isolation:
500 Vdc Input/Output (between probe and output signal)
Electrical
Connection: Teflon Cable; Optional Micro-DC male plug, Black anodized aluminum or Stainless 303 shells available.
