BetaGauge 330 Series Precision Pressure Calibrator The BetaGauge 330 is a revolution in pressure calibration technology for the process industries. With the BetaGauge 330, technicians have a small, lightweight calibrator that generates from high vacuum to 150 PSI using a high performance integral electric pump. Gone is the drudgery of manual pumping or using large, heavy and unwieldy boxes with limited portability and poor battery life. The BetaGauge 330 has a form factor only slightly larger than Martel’s popular BetaGauge 321 and weighs in at a mere 2.5 pounds. The housing is contoured to easily fit a technician’s hand with good balance top to bottom. Performance doesn’t stop with the pump. The BetaGauge 330 provides ±0.025% of full scale accuracy on its internal, isolated pressure sensor. Temperature compensation on its internal sensor ensures accuracy in field applications. An external pressure module connection supports all 29 ranges of BetaPort-P pressure modules for even greater measurement capability. Features • Integrated battery operated pneumatic pump generates high vacuum (-12 PSI/-0.8Bar) to 150 PSI/10 Bar • 3 ranges of 30 PSI, 150 PSI and 300 PSI. The 300 PSI version uses a manually operated hand pump • Accuracy of 0.025% of full scale on pressure measurement • Compact rugged design operates on eight (8) AA Alkaline batteries • Only 8" x 4" x 2 3/8" (20 cm x 10 cm x 6 cm) HWD • Light weight at just 2.5 pounds (1.2 kg) • External pressure module interface supports all 29 BetaPort-P pressure modules using optional BPPA-100 module adapter • Pt100 RTD input for temperature measurement, accurate to 0.2°F (0.1°C) (measurement only) • Source or measure 4 to 20mA including 2 wire transmitter simulation • 24 VDC instrument loop power supply • Store and recall 5 user defined setups • Large graphic LCD with backlight • Ideal for gas custody transfer flow meter applications • Pressure displayed in the user’s choice of 16 engineering units • Automatic switch test using internal or external sensors • IP56 rating • Percent error function HART™ loop load resistor (user selectable) BetaGauge 330 Hand Held Pressure Calibrator has the added functions and features. A Pt100 RTD input is provided for temperature measurements accurate to ±0.1°C (0.2°F). In addition, the BetaGauge 330 measures and simulates 4 to 20mA loop current signals. It can measure up to 30 VDC. An internal 24 VDC Instrument Power Supply supplies power to a transmitter under test.

BetaGauge 330 Hand Held Pressure Calibrator Supplied with NIST traceable calibration certificate, batteries installed, test leads, test hose, fittings, user guide, carrying case. Prices Start at $2725.00 BetaGauge 330 Side View